Scarlett Entertainment HSC 2012: Audio

How To Set Up A Mic Stand:

1.) Spread the legs of the stand apart
2.) Lossen the thumb screw on the bottom so you can adjust the stand post into an upright position
3.) Once in the upright position tighten the thumb screw to hold the post in place
4.) Losen the thumb screw in the middle of the post to extend the height of the stand
5.) Once at a desirable height tighten the thumb screw so the post is secure
6.) Adjust the arm of the stand by unscrewing the top thumb screw and tilting the arm up so the t stand is facing upwards.
7.) Once the desired length is achieved tighten the thumb screw
8.) Adjust the mic clip so that the fat end is facing towards you
9.) Wallah

How To Pack Up A Mic Stand:

1.) Adjust the top thumb screw so the arm becomes parrallel with the post and so the microphone slip is pointing towards the ground
2.) Once achieved tighten the thumb screw
3.) Adjust the middle thumb screw so that the post falls all the way down into the holding space
4.) Tighten the thumb screw once done
5.) Adjust the legs of the stand so the are folded up neatly and inline with the end of the post.
6.) Tighten the thumb screw
7.) Wallah